The Intec FORCE/2 HP is a portable, electric insulation blowing machine built for contractors who need a compact unit that still moves real volume. This two stage insulation blower runs on two standard 115 volt circuits, fills attics and walls with loose-fill, and breaks down for easy transport between jobs. With direct drive and no chains, it stays a low maintenance insulation blowing machine for cellulose and fiberglass.
What the Intec FORCE/2 HP Insulation Blowing Machine Is
The Intec FORCE/2 HP is a portable, two stage electric insulation blowing machine designed to install loose-fill insulation on two standard 115 volt circuits. It produces blowing pressure in two stages with a one-way valve, which lets it push material the distance an attic or wall cavity needs without a gas engine or a generator. It is built by Intec insulation equipment and stocked by ProSource for residential and light commercial crews.
Because the drive is direct rather than chain driven, there is less to wear out and service over the life of the machine. The polyethylene hopper holds 9 cubic feet and extends to 13, the unit weighs about 260 lbs, and a wired remote is standard with a wireless GoWireless option available. That low weight and simple power setup are what make it portable enough to carry up to most jobsites.
What Insulation the FORCE/2 HP Blows
This insulation blowing machine is built to install the two most common loose-fill materials, cellulose and fiberglass, for attic and wall work. Matching the material to the machine helps you plan coverage and hopper refills on a residential job.
The two material types below cover almost all of what this blower installs day to day.
Loose-Fill Cellulose
Cellulose is the workhorse material for this blower, and the FORCE/2 HP installs blown-in cellulose insulation at roughly 30 to 40 pounds per minute. That rate suits attic top-ups and dense pack work, and the two stage design keeps coverage even as the hose run gets longer across a large attic floor.
Fiberglass
The FORCE/2 HP also installs blown-in fiberglass insulation at about 9 to 11 pounds per minute. Fiberglass is lighter and fluffier than cellulose, so production is lower by weight, but the same machine handles both materials, which lets a crew switch between jobs without buying a second blower, and the two stage blower still carries the lighter material the full length of the hose.
Where the Intec FORCE/2 HP Works Best
The FORCE/2 HP works best on residential and light commercial jobs where portability and standard power matter more than maximum output. Its most common uses are attic top-ups, dense packing walls, blowing behind netting, and stabilized spray-on applications, all of which fit a unit that two workers can carry and plug into ordinary outlets.
Because it runs on two 115 volt circuits and weighs about 260 lbs, it is a practical choice for attic insulation crews working in occupied homes. For jobs that call for higher daily output, a truck mounted unit is the better fit, but for most loose-fill blown-in insulation work this portable blower keeps setup simple.
Hoses, Remote, and Setup for the FORCE/2 HP
A blowing machine is only as good as its hose and control setup, and the FORCE/2 HP keeps both simple. It uses a 3 inch hose outlet and runs standard insulation blower hose, while the two stage blower and one-way valve maintain pressure over longer runs.
Control is handled by a wired remote, with a wireless GoWireless remote available so the operator at the hose can start and stop material without a second worker at the machine. Because loose-fill work is dusty, pair the blower with the right respirators and coveralls before you start.
Buying the Intec FORCE/2 HP from ProSource
ProSource stocks the Intec FORCE/2 HP within our full range of insulation blowing machines, so a crew can buy the blower, hose, and material from one supplier at direct pricing. It also sits alongside the rest of our insulation machines if you are comparing portable and truck mounted options.
The FORCE/2 HP ships nationwide, and customers across California get same-day or next-day delivery from our Chatsworth warehouse. Crews that also handle tear-outs often add a unit from our insulation removal vacuums so they can remove and install on the same visit. Reach out and we will confirm hose length and accessories for your jobs.
