Intec VORTEC® MEGA Beast Insulation Removal Vacuum

The Intec VORTEC MEGA Beast is the highest-production insulation removal vacuum in Intec’s VORTEC line, built for contractors who pull insulation for a living and need to clear it fast. This commercial insulation removal vacuum pairs a 25 inch abrasive-resistant steel impeller with a 35 hp commercial engine and a full 8 inch inlet and outlet, yet stays portable on a weight-balanced frame with 10 inch run-flat wheels and a brake. It removes loose-fill, batt, and spray-applied insulation for attic cleanouts, restoration, and HVAC cleaning.

What the Intec VORTEC MEGA Beast Insulation Removal Vacuum Is

The Intec VORTEC MEGA Beast is a gas-powered insulation removal vacuum engineered for high-volume extraction of attic and wall insulation. It is the most productive vacuum in the Intec VORTEC family, rated at over twice the throughput of the standard VORTEC Beast, so it works as a daily production tool rather than an occasional-use machine. Built by Intec, it is stocked by ProSource for crews that need maximum removal speed on every job.

At the core of this insulation removal vacuum is a 25 inch, 1/4 inch thick abrasive-resistant steel impeller driven by a 35 hp commercial V-twin engine, feeding a full 8 inch inlet and 8 inch outlet. Despite that power it stays portable, since a weight-balanced design, 10 inch run-flat wheels, a brake, and Intec’s anti-tip frame let a crew move and position it on a driveway, in a yard, or beside an attic access. An Oil Alert system shuts the engine down on low oil to protect the machine.

What Materials This Commercial Insulation Vacuum Removes

This commercial insulation vacuum is designed to remove the full range of materials a removal or restoration crew encounters, from light loose-fill to dense batts and spray-applied foam. Knowing what it handles helps you match the machine to the job and protect the impeller from materials it is not built for.

Like any high-speed removal vacuum, it is meant for insulation and the debris bound up in it, not for hard objects such as nails, stones, or wood scraps that cause premature wear on the impeller and shroud.

Loose-Fill Cellulose and Fiberglass

Loose-fill is the most common material this insulation vacuum pulls, and it moves quickly through the 8 inch inlet. Blown cellulose and fiberglass both extract cleanly, whether you are recycling old material or clearing a contaminated attic before a fresh install, and the machine’s high airflow is what separates it from smaller units on deep loose-fill.

Batt Insulation

The MEGA Beast also clears batt insulation during full attic and wall cleanouts, drawing in fiberglass and mineral wool batts that would clog a weaker vacuum. This matters on tear-outs where loose-fill and batts are mixed together, since one machine handles both materials without slowing the crew down and keeps a mixed removal on schedule.

Spray-Applied Foam and Fire, Water, or Smoke Damage

For restoration work this insulation removal vacuum recycles spray-applied insulation and removes material damaged by fire, water, or smoke, along with general HVAC cleaning. Crews handling remediation use it to strip spray foam and soiled insulation quickly so rebuilding can begin, while contained discharge keeps the jobsite clean throughout the removal.

Where This Attic Insulation Removal Vacuum Works Best

This attic insulation removal vacuum works best wherever insulation has to come out fast and cleanly. Its most common job is the attic cleanout, where crews remove old or contaminated blown-in insulation before installing fresh material, and it is equally suited to fire, water, and smoke restoration and to HVAC cleaning.

Portability is what makes it practical on these jobs. The weight-balanced frame, 10 inch run-flat wheels, and brake let a crew roll it across a yard, hold it steady on a slope, and stage it next to an attic access or a window. That makes it a natural fit for attic insulation removal, which is the single most common use for a vacuum this size.

Hoses, Bags, and Accessories for the MEGA Beast Removal Vacuum

A removal vacuum is only as productive as its setup, so plan the hose, bag, and filter package along with the machine. The MEGA Beast runs 8 inch, 6 inch, and 4 inch vacuum and blowing hoses, discharges into high-capacity insulation vacuum bags, and pairs with the VORTEC vacSHIELD filter to keep debris out of the impeller and extend the machine’s life.

Intec also offers the VORTEC twin TURBO, which lets two workers run one vacuum, plus vacTUFF hose, vacTUBEs, and the recommended PKG 44 and PKG 64 bundles that combine the vacSHIELD, twin TURBO, hose, and vacBAGs for both inlet and outlet. For a dusty tear-out, add the right respirators and coveralls, and ask ProSource to spec a complete removal package for your crew.

Buying the Intec VORTEC MEGA Beast Insulation Removal Vacuum from ProSource

ProSource stocks the Intec VORTEC MEGA Beast as part of our full range of insulation machines, so contractors can buy removal and install equipment from one supplier at direct pricing. Crews that both remove and blow insulation often pair it with a unit from our insulation blowing machines category for a complete attic workflow.

The MEGA Beast ships nationwide, and customers across California get same-day or next-day delivery from our Chatsworth warehouse, with the rest of our service area covered as well. It is offered with a Honda iGX800 or Vanguard 35 hp engine, and we ship the configuration that fits your location and emissions requirements. Reach out and we will confirm the right package, hose sizes, and bags for your jobs.